Equipment installation 1, vibrating feeder for ingredients, in order to ensure uniform and stable feed dosing when gravity to prevent the material should be installed horizontally, such as general material continuous feeding feeder standard, can be installed at 10 ° tilt . For viscous materials and materials with large water content can be installed at 15 ° tilt. 2, after the installation of the feeder should be left horizontal 20mm travel clearance shall be horizontal, suspension with flexible connections. 3, before the empty test feeder should all bolt once, especially vibration motor bolt, 3-5 hours of continuous operation should be re-tightened once. 4, test both vibration motors must reverse rotation, the stability of current and noise, abnormal should be promptly stop treatment. 5, motor bearings every February bear grease, hot season should be filling a lubricant month. Preparations before starting operations regulations: (1) Read on duty record feeder structure, dealing with the past on one shift. (2) whether the check and eliminate between the body and the chute, spring and bracket affect the body movement of debris materials. (3) Carefully check all the fasteners are fully tightened. Lubricants (4) Check the exciter is higher than in the height of the oil standard. (5) Check the drive belt is good; if found damaged should be replaced; when there is oil, wipe it with a rag. (6) Check guard is good, there is insecurity should find and remove. Efficient feeder, Zhongtong machinery (certified), Nanyang feeder Xinxiang City vibration Machinery Co., Ltd. Zhongtong provided. Xinxiang City Zhongtong vibration Machinery Co., Ltd. (www.373zt.com) Henan Xinxiang, leaders separation equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Machinery leadership in the congregation with the staff warmly welcome all inquiries negotiations to create all-Machinery better future.